If users are trying to make precise enough line alignment at various work distances, unless prior line positioning work, it is an efficient job for users to make use of a highly intense beam device of 650nm red laser line generator. In those of industrial and high tech precise line measuring work fields, being made with a qualified glass coated lens with wide fan angles and import 650nm red laser diode, configured with high duration metal housing tube, this direct diode emission made 650nm red laser module just assures good laser beam stability and highly reliable red reference line projection in long lasting use constantly.
Designed with an AC/DC adapter, not spending extra time on battery change, this 650nm red laser line generator is able to make continuous red laser beam emission from laser beam aperture. Unlike the formal use of a simple red laser pointer, it gets even better thermal emitting in type of a metal heat sink. It gets even better thermal emitting than formal air or water cooling system. In addition, in practical precise red line alignment work within 8 to 10 hours per day, after leaving enough time and space for tube cooling down, this red laser module always gets the lowest production cost and the most reliable red line alignment in long lasting use.
According to the advanced use of a qualified separate crystal lens within 10 to 93 degree, cooperating with strict laser beam stability and aging preventing test up to 24 hours, this 650nm red laser line generator is generating the best quality non Gaussian distribution red laser light, and the finest red line source in use. It projects extremely fine red line source of 0.5 meter to 6 meters. In various industrial precise line aligning work fields, after basic measurement and experiment of line length, line fineness and work distance, after correct use of output power and optic lens fan angle, this 650nm red line laser obtains high precision line alignment for all industrial machinery processing works.
Within the maximum work distance of 25 meters, unless it is pointing under sunlight, this 650nm red laser line generator enables the most convenient installation, and the easiest reaching of line projection onto any working surface. It allows freely adjusted laser beam focus, thus it achieves the most concentrated red laser light emission and increasing accuracy red line alignment at different work distances. When users are selecting high power red alignment laser for long distance, it is a key issue to take laser safety issue and wear correct laser safety goggles so as to achieve easy and secured line alignment for both industrial and high tech precise line measuring fields.
Tag: alignment laser
High power blue laser diode module for high lighting and long distance
Among all kinds of precise and accurate dot projection at quite long work distance, it is not easy to reach with any formal manual dot projecting tool or other formal output power made laser device. There is also no end for users to develop a more practically used dot measuring tool, such as a high power 445nm blue laser diode module. When it applies an import 445nm blue laser diode with high power and specially used thermal emitting system, it is always working well with the most intense and powerful blue laser beam emission, and the clearest blue dot indication for both great distance and high lighting working occasions.
Being made with an import 445nm blue laser diode up to 150mW to 500mW, not the same as a formally used low power range laser device, the genuine use of a high power blue laser diode module is applying for even longer work distance and higher lighting working occasions etc. it is applying a specially designed metal heat sink cooling system with a separate part, the practical use of high power blue dot laser just leaves enough even larger space for tube cooling down, and achieves even more stable performance in long lasting use.
Whatever kind of working surface it is pointing, on basis of the use of a qualified glass coated lens and a series of strict laser beam stability and aging preventing tests up to 24 hours, the genuine use of a high power 445nm blue laser diode module is working well with high transmittance and high density blue laser light emission from beam aperture. When it makes special use of a glass window, even though it is making dot measurement under harsh occasion of moisture or dust, it still gets good environmental stabilization, and highly stable dot indication for both industrial and science field.
Every time it makes long lasting dot alignment, this high power blue laser diode module is still working well as an accessory part. It enables easy reaching and long lasting dot indication onto any vertical or horizontal surface. When it projects high collimation blue laser light emission, only after its correct use of output power, it ensures high level of accuracy dot projection for various raw material processing works. According to high attention to powerful laser radiation and serious thermal energy, after proper use of 445nm wavelength preventing laser safety goggles, it assures easy and secured dot alignment effectively.
Powerful Beam High Power 650nm Red Laser Diode Module
When users are trying to make highly clear and accurate dot measurement at quite long work distance, and other formal lighting working occasions, it is always making good job for users to apply a high power 650nm red laser diode module. The advanced use of qualified optic lens and import 650nm red laser diode are cooperating well. Owing to special use of a separate thermal emitting system and constant power source supply, not relying on any manual labor force input or prior dot positioning work, high power red dot laser always assures the best direction and the most precise red dot generation onto all working surfaces constantly.
The real use of high power red laser diode module is always working for quite long time and great distance dot positioning work. Different from a simple red laser pointer only used for temporary dot positioning works, it is being made with even better thermal emitting design. The selection of separate metal heat sink cooling system is cooperating well with highly durable anodized aluminum alloy housing tube. It gets the largest space leaving for tube cooling down, and also achieves highly reliable and stable red dot projection in long lasting use.
Under operation within wide range operating temperature and other harsh working occasion, this 18.9mm diameter made high power 650nm red laser diode module makes sure of the most convenient installation, and the easiest mounting onto any industrial device or equipment. It applies an import 650nm red laser diode with high power up to 150mW to 500mW, only after its proper equipment with 9V or 12V 1000mA DC power supply, it just enables long lasting red reference dot projection within constant work time of 8 to 10 hours. It also gets no laser light decay or dim in proper use.
Whatever output power it is selecting, configured with APC, ACC driving circuit board design, high power 650nm red laser diode module keeps work with constant output power and electric current supply. Under operation by skilled users or professionals, it achieves the most reliable red alignment laser dot projection, reduced possibility of tube burning out or damage, and long serving lifetime of more than 8,000 hours. In occasion that high power red dot laser projects the most powerful red laser radiation and thermal energy hurt to human eyes, for the most important of all, after correct wearing of 650nm wavelength preventing laser safety goggles and avoiding eye exposure to beam aperture, it achieves secured and precise dot indication in all application fields effectively.
Long Lasting Work with 635nm High Power Red Laser Diode Modules
If users are trying to make highly bright and clear dot generation at quite long work distance and high lighting, none of manual dot projecting tool can get ideal dot aligning accuracy as expected. At the same time, after constant technical innovation of 635nm red laser diode and qualified glass coated lens, laser tech engineer has just developed a quite practically used device of a high power 635nm red laser diode module. It is keeping work with high brightness and high stability red laser beam and red dot emission, after proper mounting onto industrial machine or device, it just assures low production cost and high stability red dot generation at great distance and long lasting working occasion effectively.
On basis of the use an external AC/DC adapter, without any serious relying on manual labor force input, this high power 635nm red laser diode module just makes sure of continuous and high brightness red laser beam and red reference dot projection at long work distance and high lighting working occasion. It is getting beginning high power up to 150mW to 500mW. After correct use of 9V 1000mA AC/DC adapter and proper use of an inner metal heat sink cooling system, high power red dot laser just assures the best thermal emitting, and the most reliable red reference dot projection within long lasting time of 8 to 10 hours per day.
According to the most advanced use of qualified glass coated lens, whatever kind of working surface it is pointing, this high power 635nm red laser diode module is performing well with high transmittance and high intensity red laser light emission. It gets special use of a glass window in front of laser beam aperture, once it is pointing under multiple working environments, it still keeps work with clear and bright red reference dot projection under moisture or dust as well. Without the use of sunlight, it is making quite satisfied dot generation for a lot of raw material processing works, including industrial precise dot alignment, military targeting, industrial precise dot alignment, lab experiment and high tech.
Any time users are trying to make highly clear dot generation at great distance, high power red laser diode module is operating easy and conveniently as an accessory part. It also allows quite easy screw of adjustable focus optic lens, after immediate red laser light concentration, it is converting into a highly clear and accurate red reference dot projection for both great distance and high lighting working occasions. When users are aware of any powerful red laser radiation and reflection, after correct wearing of 635nm wavelength preventing laser safety goggles and avoiding eye exposure to laser beam aperture, this industrial alignment laser just assures easy and highly secured dot generation in all application fields effectively.
Review of High Power 638nm 150mW to 500mW Red Cross Line Laser Module
For the operation of highly clear and fine cross line alignment at quite long work distance and high lighting working occasions, it is always a good job for users to apply a high brightness and high power 638nm red cross line laser module. In any type of industrial and high tech precise cross line aligning work fields, being made with the best quality glass coated lens with different fan angles and import 638nm red laser diode with high power, this direct diode emission made red laser just assures high intensity red laser light emission, and highly clear and fine red vertical and horizontal lines generation at long work distance.
Available with an import high power 638nm red laser diode within 150mW to 500mW, not the same as formal output power made red laser device, this high power 638nm red cross line laser module has just achieved superior nice laser beam stability and increasing accuracy red cross line projection in long lasting use. It applies different size tube diameter. In addition, when it gets high power up to 300mW to 500mW, in order to assure highly stable cross line alignment, it just adopts separate metal heat sink cooling system and square laser module shape. Whatever kind of working surface it is pointing, only if it gets superior nice thermal emitting, this cross laser alignment tool just achieves excellent laser light cycling use, and highly reliable and stable cross line projection in continuous work.
According to advanced use of qualified glass coated lens, available with different fan angles of 10, 15 and 110 degree, this high power 638nm red cross line laser module always projects different dimension red cross line lengths and finenesses at various work distances. When it passes through quite strict laser beam stability test and aging preventing test up to 24 hours, once it is operating well by skilled users or professionals, this direct diode emission high power red laser module always works well with good performance, without any appearance of laser light decay or dim in proper use.
Being made with extending electric wires for both high power red cross line laser module and DC power supply, within the maximum installed distance of 3 meters, it just makes easy and quick response cross line projection in distance. It should also operate without sunlight. When it makes correct use of output power, after getting intelligent feedback control of output power and electric current supply, this red alignment laser just makes sure of secured and free measurement in long lasting use. Only if users are wearing correct laser safety goggles and avoiding eye exposure to beam aperture, it makes safe and free use for all application fields.
200mW 445nm High Power Blue Laser Diode Module Review
What is a good solution to make clear and accurate enough dot alignment? It is always get serious limitation of long distance or high height. However, without any barrier by manual operation, it is making good job with an intense beam emitting tool of high power 445nm blue laser diode module. Different from any formal manual or mechanical dot aligning tool, only after its advanced use of good thermal emitting system and external equipped electric power source, this industrial stabilized blue dot laser always gets good environmental stabilization, and highly clear and accurate blue dot alignment for both long work distance and high lighting working occasions as well.
This 200mW 445nm high power blue laser diode module gets special use of an external AC/DC adapter as electric power source. It is leaving enough space for tube cooling down. At the same time, comparing with formal alkaline battery power source, without spending extra time on alkaline battery power source, it just gets continuous electric power source, and blue reference dot projection in long time use. The advanced use of metal heat sink cooling system is configuring well with durable anodized aluminum alloy housing tube, available with 26mm diameter metal housing tube, high power blue dot laser just achieves superior nice thermal conductivity, and increasing stability blue dot alignment in long time use.
According to special use of extending electric wires for both high power blue laser diode module and electric power source, within freely installed distance of 3 meters, it always makes easy and quick blue reference dot projection onto any raw material surface. There is always increasing temperature and serious electric current impact in long time constant dot aligning works. However, the advanced use of APC, ACC driving circuit board always assures constant output power and electric current supply, and reduced possibility of tube burning out or damage.
In formal constant dot measuring work fields, high power 445nm blue laser diode module always makes highly clear dot indication for both industrial and high tech dot measuring work fields. When it makes quite easy screw of adjustable focus optic lens and gets immediate blue laser light concentration, this blue alignment laser gets increasing precision and quick response dot alignment in long time. When users are aware of any thermal energy hurt and powerful blue laser radiation and reflection, after correct wearing of laser safety goggles and avoiding eye exposure to beam aperture, it always assures highly secured and free dot alignment in all application fields constantly.
Highly Stable Non Gaussian 650nm Red Line Laser Module
In any working occasion where users are trying to make the most precise line alignment, even though it is not easy to reach with prior line drawing or line printing works, it is not the end for laser tech engineer to develop a quite practically used device, such as a non Gaussian beam 650nm red line laser module. It is working easy and quick after its correct use of an external electric power source. Any time it makes correct use of separate crystal lens degree and correct output power, after its proper installation, this laser line generator is just able to work with highly clear and fine enough red line projection onto various working surfaces.
Available with an external AC/DC adapter, selecting correct operating voltage of 5V, 9V 1000mA DC power supply, this 650nm red line laser module is able to work with wide range output power of 5mW to 100mW. For close distance red line projection, it is enough to use a low power 650nm red laser within 5mW to 20mW. High power red laser up to 30mW to 100mW makes highly clear red line alignment at great distance and other formal lighting working occasion as well. Once this laser line generator makes good use of metal heat sink cooling system inside its durable aircraft used aluminum alloy housing tube, after correct use of 16mm and 26mm diameter tube, it is just performing with superior nice thermal emitting and increasing stability red line alignment in long time use.
Available with qualified separate crystal lens, comparing with formal glass coated lens or plastic coated lens, this 650nm red line laser module is projecting non Gaussian distribution red laser beam, and highly uniform red reference line projection at various working surface. Owing to its strict laser beam stability tests up to 24 hours and special use of glass window in front of laser beam aperture, only if it gets constant red line alignment within 8 to 10 hours per day, this red laser line generator just achieves good laser light cycling use. It is also getting high level of accuracy red line projection for all precise device manufacturing works.
Any time non Gaussian 650nm red line laser module is pointing onto various working surfaces, it should have to work with various line lengths and line finenesses. Only if it gets correct use of optic lens degree, and makes proper adjustment of line fineness and line projecting direction within three dimensions, this red alignment laser achieves required line aligning accuracy. When users are paying high attention to any thermal energy hurt to human eyes and wearing correct laser safety goggles , high power red line laser makes safe and easy line alignment permanently.
Fine Measured High Power 650nm Red Cross Line Laser Module
When users are looking for an easy operating cross line aligning tool, not limited by long distance, high height and other complex working environments, it should be an easy job for users to apply a high power 650nm red cross line laser module. It is projecting intense and powerful red laser light directly from 650nm red laser diode. Employing the most qualified glass coated lens with different fan angles and special use of separate cooling system and electric power source, high power red laser alignment is being made into an industrial stabilized cross line measuring device. It is able to work with easy and highly clear cross line generation for all precise device manufacturing work fields.
According to the use of a separate metal heat sink cooling system, cooperated with durable aircraft used aluminum alloy housing tube, this high power 650nm red cross line laser module just gets even larger space for tube cooling down than formal low power red laser. In addition, either it is pointing under low temperature or high temperature, it is still keeping clear and visible enough red laser beam emission. Only if this compact size tube made high power red line laser makes proper installation onto other machine or device, it just makes extremely clear and no decay light line projection in continuous use.
Designing with the best quality glass coated lens with different fan angles of 10, 15 and 110 degrees, high power 650nm red cross line laser module is performing with high transmittance red laser light emission, and high linear quality red vertical and horizontal lines generation with accurate 90 degrees. It is projecting various red cross line lengths within 0.5 meter to 6 meters. After correct selection of glass lens degree and output power, unless it is pointing under sunlight, high power red cross laser makes the most satisfied cross line alignment at great distance and other formal lighting occasions etc.
According to the use of extending electric wires for both high power red cross line laser module and DC power supply, it just enables the maximum installed distance of 3 meters and convenient cross line generation onto multiple working surfaces. This industrial alignment laser enables quite easy screw of adjustable focus optics and immediate red laser light concentration, it just achieves extremely fine and straight red cross line source emission in distance. When users are paying special attention to thermal energy hurt to eyes and wearing correct 650nm wavelength preventing laser safety goggles, without any eye exposure to laser beam aperture, this high power red cross laser makes safe and easy measurement in all occasions perfectly.
High Power 532nm 200mW Green Dot Laser Module
Whatever kind of working surface users are trying to make clear and quick dot measurement, even though it is not easy to reach with a simple green laser pointer or other formal manual dot aligning device, it would be an easy and efficient solution to try a high power 532nm 200mW green dot laser module. It is performing with the best quality green laser light source emission from middle wavelength of 532nm green DPSS laser. Any time it gets the most special design part of separate cooling system and external electric power source, this green laser alignment is able to work with the clearest and the most visible green reference dot indication at great distance effectively.
The usual dot alignment work might be processing onto various working surfaces, thus have to work with different dimension green reference dot generation in use. After the use of qualified glass coated lens, whatever kind of working occasion it is pointing, 532nm 200mW high power green dot laser module is performing with high transmittance green laser light emission. Owing to the use of glass widow in front of laser beam aperture, even though it is pointing under harsh working occasion of moisture or dust, high power green laser alignment is still working without any laser light decay or blur.
After the selection of APC, ACC driving circuit board, even though there is increasing temperature and serious electric current impact, high power 532nm 200mW green dot laser module is still generating constant output power. Only if it keeps work within 8 to 10 hours, after enough time leaving for tube cooling down, this alignment laser is still getting perfect laser light cycling use, and the most reliable green dot measurement at great distance and other high lighting working occasions.
In various precise dot alignment work fields, after quite easy screw of adjustable focus optic lens, high power 532nm 200mW green dot laser module assures immediate green laser light concentration, and the most precise green dot alignment. For the most important of all, whatever kind of working surface it is pointing, it is a key issue to avoid any eye exposure to laser beam aperture. It is just a necessity for users to wear correct 532nm wavelength preventing laser safety glasses, after proper installation onto desired machine or device, this high power green alignment laser just makes sure of highly precise and secured dot alignment in all application fields perfectly.
Easy Aligned 150mW High Power Green Laser Diode Module
What is the best solution to make sure of clear and accurate enough dot alignment at quite long work distance and other hard reaching places? It is not easy to reach with a simple green laser pointer. However, after great technical innovation of 532nm green DPSS laser tech and good use of separate cooling system, high power green laser diode module is just being made by laser tech engineers. Only after its proper installation and correct connects with an external electric power source, high power green dot laser is just able to work with the best quality green laser light emission, and extremely clear green dot measurement for both great distance and high lighting perfectly.
Under operation with an external AC/DC adapter, different from a formal alkaline battery power source, 150mW high power green laser line generator just leaves enough space for inner tube cooling down. It is just performing with continuous green laser beam and green reference line projection from laser beam aperture. In addition, according to the use of extending electric wires for both green dot laser and DCX power supply, the real dot alignment allows the maximum installed distance of 3 meters, and easy green dot indication onto any vertical or horizontal surface continuously.
According to the use of high quality glass coated lens and quite strict laser beam stability tests up to 24 hours, 150mW high power green laser diode module is just achieving high transmittance green laser light, and extremely clear green dot generation at great distance and high lighting working occasions. Owing to the use of strict laser beam stability tests up to 24 hours and special use of glass window in front of laser beam aperture, high power green dot laser is able to work with good laser light cycling use, and no decay light dot generation under any harsh working occasion of moisture or dust etc. It is just performing perfectly in multiple industrial and high tech dot aligning work fields.
Whatever kind of working surface it is pointing, owing to the use of APC, ACC driving circuit board, 150mW high power green laser diode module is just assuring constant output power supply. Within constant green alignment laser dot projection within 8 to 10 hours per day, this alignment laser maintains good performance and highly stable dot indication under increasing temperature. At the same time, after high attention to thermal energy hurt to human eyes and proper wearing of 532nm wavelength preventing laser safety glasses, it just achieves the most satisfied dot alignment in all occasions perfectly.