Different from a simple green laser pointer only used for temporary dot positioning work, either it is used for close or long distance, it is always making an efficient job to operate a high density beam emitting device of a 520nm green laser diode module. It emits highly bright and intense forest green laser beam directly from an inner laser diode. In those of long lasting and long distance precise dot measuring work fields, after its proper installation and selection of correct output power, within quite long work distance and multiple lighting occasion etc, this 520nm green dot laser is able to make ultra clear and precise forest green dot projection at long extending distance constantly.
When 520nm green laser diode module gets proper use of an AC/DC adapter as its electric power source, comparing with a simple green laser pointer, it is always required to make long time lasting dot indication onto a lot of working surfaces. It has been made with an import 520nm green laser diode within 5mW to 50mW as its beam emitting source. In order to assure its long lasting dot generation, it gets basic use of a metal heat sink cooling system inside a durable anodized aluminum alloy housing tube. When it is used as an accessory part, it gets superior nice thermal emitting and thermal conductivity, and also maintains ultra stable forest green dot projection for all machinery processing works.
Being made with a qualified glass coated lens in front of laser beam aperture, whatever kind of working surface it is pointing, this 520nm green laser diode module is working well with high transmittance and high density forest green laser beam emission at several miles far away. At the same time, besides its operation for close distance and inner room working occasion, the use of a high power green dot laser up to 30mW to 50mW also makes highly precise and bright forest green dot indication within the maximum work distance of 25 meters and other formal lighting occasions as well.
According to the use of electric wires extension for both of 520nm green laser diode module and DC power supply, not limited by manual labor force input, it enables quite easy reaching and no barrier dot indication onto any vertical or horizontal surface. Being made with adjustable focus optic lens, after its immediate green laser light source concentration, this alignment laser enables high efficiency conversion of ultra bright and precise green dot projection for all labs, institutes and colleges etc. When lase users are taking active laser safety measures and avoiding eye exposure to laser beam aperture, this alignment laser still brings users easy and secured measurement for all working occasions effectively.
Category: green laser diode module
APC Driving 532nm Green Laser Diode Module
Whenever users are looking for a high brightness and high accuracy dot alignment, in those of industrial and high tech precise dot measuring work fields, a lot of factory workers and engineers would prefer to make use of a highly bright beam emitting tool of a 532nm green laser diode module. It always projects sensitive color and easily absorbed green laser light source from a middle wavelength 532nm green DPSS laser system. Cooperating with basic thermal emitting system and qualified optic lens inside a highly durable metal housing tube, only after its correct use of output power and proper installation onto desired machine or device, this 532nm green dot laser always makes highly precise and quick response green dot projection onto various working surfaces constantly.
the real use of a 532nm green laser diode module should be processing onto different working surfaces. The adoption of a durable anodized aluminum alloy housing tube is bearing wide range operating temperature of -10 to 45 degree Celsius. In any type of harsh occasion of mechanical moving or shocking etc, it still gets no effect at all. Being made with a 5V, 9V 1000mA AC/DC adapter, not spending extra time on alkaline battery power source change, this 532nm green dot laser just gets even larger space for tube cooling down, and makes constant green laser beam and green reference dot projection as long as 8 to 10 hours per day.
Unlike the use of prior dot positioning work, only according to real work distance and lighting occasion, this 532nm green laser diode module just enables correct use of output power of 5mW to 100mW. It is equipped with a qualified glass coated lens and a glass window in front of laser beam aperture. Once it is pointing under harsh occasion of moisture, dust, rain, water or fog etc, this 532nm green dot laser still gets high density and high transmittance green laser light source emission, and high efficiency conversion of ultra clear and precise green dot projection within the greatest work distance of 25 meters and high lighting working occasions as well.
When 532nm green laser diode module gets advanced use of APC, ACC driving circuit board, whatever output power it is selected, it is keeping work with constant green laser beam and green dot projection as long as 10 hours per day. It gets reduced possibility of tube burning out or damage and long serving lifetime of more than 8,000 hours. When alignment laser up to 50mW to 100mW is used for long time and long lasting use, it is a key issue to take active laser safety measure and wear correct laser safety glasses, thus it brings users easy, precise and secured dot measurement for all working occasions effectively.
High Brightness 515nm Green Laser Diode Module
In any type of high precision and high brightness dot indication at various work distances, in order to assure its high work efficiency and high speed, it should be the best choice for users to have a try of a 515nm green laser diode module. It is working well with highly bright forest green laser light emission directly from an inner part of a 515nm green laser diode. Being made with its inner thermal emitting system inside a different dimension metal housing tube, only after its proper mounting onto those of industrial machine or device, this 515nm green dot laser is able to make ultra clear and quick response dot indication for all machinery processing works effectively.
Usually on the basic of real work distance and lighting occasion, this 515nm green laser diode module enables correct use of output power of 5mW to 50mW. It is made with an import 515nm green laser diode inside a highly durable anodized aluminum alloy housing tube. In those of wide range operating temperature and other harsh working occasion, such as mechanical moving, shocking or calibration etc, it is working well with highly stable and reliable forest green laser beam and green dot indication in long lasting use. For the most important of all, even though there is increasing temperature and serious electric current impact, this 515nm green dot laser still gets no effect at all, and maintains its ultra clear dot indication within great distance of 25 meters and multiple lighting occasions etc.
When 515nm green laser diode module gets constant electric power source from a 5V, 9V 1000mA AC/DC adapter, not any longer spending extra time on battery change, it is making continuous green dot projection within daily operating time of 8 to 10 hours. It only allows proper use by skilled users or professionals, ans still gets up to 85% laser beam stability in continuous use. According to real work distance and lighting occasion, only after its correct use of output power and proper mounting onto those of industrial machine or device, this 515nm green dot laser just brings users quite satisfied dot measurement for drilling system, laser marking, laser engraving, military targeting, spectrum analysis and high tech etc.
Cooperating with different dimension metal housing tube and electric wires extension for both of 515nm green laser diode module and DC power supply, it enables long lasting and no barrier dot measurement for a lot of application fields. When it is operating with high power up to 50mW for those of long distance and high lighting working occasion, it is a necessity for users to pay high attention to thermal energy hurt to eyes. When alignment laser is operating with proper wearing of laser safety glasses and avoiding eye exposure to laser beam aperture, it just brings users easy and secured use for all working occasions effectively.
High Precision Glass Coated Lens 100mW 532nm Green Laser Diode Module
In any type of ultra clear and precise dot generation at longer distance than formal hand reaching, it is not workable at all to only rely on any manual labor force input, but making even better job to operate a high brightness device of a 100mW 532nm green laser diode module. Employed by advanced use of a 532nm green DPSS laser and basic thermal emitting system inside a high duration metal housing tube, it is working well with high density and high brightness green laser light source emission at long extending distance. In those of industrial and high tech precise dot measuring work fields, after its operation for those of high lighting and long distance, it is able to make ultra clear and precise dot alignment for all machinery processing works constantly.
Owing to the use of an AC/DC adapter, comparing with a simple green laser pointer, the real use of a 532nm green laser diode module is working well with constant green laser beam emission at long extending distance. It emits ultra clear green reference dot projection within the maximum work distance of 25 meters, and other high lighting working occasion, including sunlight as well. For the most important of all, when 532nm green dot laser applies a metal heat sink cooling system inside a highly durable anodized aluminum alloy housing tube, it is working well with ultra high laser beam stability and ultra clear green dot indication for all harsh occasions.
When 100mW 532nm green laser diode module applies a qualified glass coated lens, cooperating with up to 24 hours aging preventing and beam stability test, it is always generating high transmittance green laser light source from laser beam aperture. Once it gets low laser beam divergence of less than 1mrad and special TEM00 laser beam mode, either it is pointing at close or long distance, this 532nm green dot laser is working well with the most compact size and the brightest green dot indication for both of industrial and high tech work fields.
Being made with APC, ACC driving circuit board, in process of long lasting dot positioning work, this 100mW 532nm green laser diode module is performing well with constant output power and electric current supply. It gets reduced possibility of tube burning out or damage, and long serving lifetime of more than 8,000 hours. For the most important of all, when it projects intense green laser light and thermal energy hurt to eyes, after correct wearing of laser safety glasses and avoiding eye exposure to laser beam aperture, this green alignment laser just brings users easy, secured and long lasting dot indication for all working occasions.
Long Lasting Measured 50mW 532nm Green Laser Diode Module
If users are not much sure of how to make ultra clear dot projection at long work distance, it should be the best chance for users to operate a 532nm green laser module. It emits pure and bright green laser light from a middle wavelength 532nm green DPSS laser system. In a lot of industrial and high tech precise dot measuring work fields, on the basis of its correct use of output power and proper connects with DC power supply, this 532nm green dot laser just makes quite easy reaching, high precision and long lasting dot indication for a lot of raw material processing works constantly.
The usual use of a 532nm green laser diode module would be working for a quite long time, thus it is a major part to maintain its stable and reliable dot indication in long lasting use. It is applying advanced 532nm green DPSS laser system, cooperating with quite low laser beam divergence of less than 1mrad and special Tem00 laser beam mode, no matter it is pointing at close or long distance, this dot laser alignment tool always keeps work with high brightness and ultra compact size green dot projection as expected.
Being made with a qualified glass coated lens, whatever kind of working surface it is pointing, this 50mW 532nm green laser diode module is working well with high transmittance and high density green laser light source emission at long extending distance. It gets special use of a glass window in front of laser beam aperture, as a result, even though it is pointing under moisture, dust, rain, water or fog etc, this green dot laser alignment still keeps work with ultra clear and precise green dot projection as long as 25 meters and other high lighting working occasions as well.
According to quite easy use of APC, ACC driving circuit board, even though it gets high power up to 50mW, this 532nm green laser diode module still keeps work with constant output power and electric current supply. It enables long lasting green dot projection within 10 hours, and long serving lifetime of more than 8,000 hours in proper use. When it is used for both of long time and long distance use, after high attention to thermal energy hurt to eyes and proper wearing of laser safety glasses, this green alignment laser still brings users no danger and no mistake dot alignment at long extending distance constantly.
How Can Glass Coated Lens 520nm Green Laser Diode Module Work Continuously?
In any type of highly precise and highly clear dot indication at different work distances, even though it is far more enough than formal hand reach, it would be a quite nice solution to have a try of a 520nm green laser diode module. It is working well with high density and highly visible green laser beam emission from an inner part of a 520nm green laser diode. In practical precise dot measuring work fields, only according to real work distance and lighting occasion, this 520nm green dot laser with a correct output power has just brought users quite satisfied dot measurement for all precise machinery processing works effectively.
The basic dot alignment work with a 520nm green laser diode module has to work for a quite long time, thus it is a major part to maintain its stable and long lasting dot measurement effectively. It applies an import 520nm green laser diode within 5mW to 50mW as its beam emitting source. As a result, once it is cooperating with a metal heat sink cooling system inside a highly durable anodized aluminum alloy housing tube, available with 16mm and 26mm diameter tube design, this direct diode emission made 520nm green dot laser has just got superior nice thermal emitting and thermal conductivity. When it makes continuous forest green dot alignment within 10 hours per day, after leaving enough time and space for tube cooling down, it achieves high level of laser light cycling use for all machinery processing works.
Owing to its high thermal consumption from laser beam aperture, this direct diode emission made 520nm green laser diode module within 5mW to 50mW has just adopted different operating voltage of 5V, 9V 1000mA DC power supply. It enables highly clear green dot projection for close distance, long distance and high lighting working occasion as well. For the most important of all, owing to its special use of adjustable focus optic lens, after its immediate laser light focusing, this 520nm green dot laser still gets high efficiency conversion of increasing brightness and accuracy dot generation at great distance.
Being made with APC, ACC driving circuit board design, whatever output power it is selected, this 520nm green laser diode module still makes sure of constant output power and electric current supply. It enables long lasting forest green dot projection within 10 hours per day, and reduced possibility of tube burning out or damage in proper use. When this alignment laser is operating by skilled users or professionals, after high attention to laser safety issue and wearing correct laser safety glasses, it still brings users easy, free and long lasting dot alignment for all machinery processing works continuously.
How to Make Efficient Use of 5mW to 50mW 515nm Green Laser Diode Module?
In any type of high precision and high brightness dot indication at different work distances, not simply relying on any manual labor force input, it should be a quite nice solution to operate a highly intense beam emitting tool of a 515nm green laser diode module. Being made with an import 515nm green laser diode and good thermal emitting system inside a highly durable metal housing tube, only after its proper mounting onto any other industrial machine or device, this 515nm green dot laser just brings users easy reaching, good direction and long lasting forest green dot indication for a lot of application fields effectively.
The basic use of a 515nm green laser diode module enables long time continuous dot alignment onto different working surfaces. Comparing with a simple green laser pointer, it gets even better thermal emitting system. As a result, it is applying an import 515nm green laser diode within 5mW to 50mW as its laser beam emitting source. In those of long lasting dot measuring work fields,after its adoption of anodized aluminum alloy housing tube with different diameter of 16mm and 26mm, this 515nm green dot laser just enables easy carrying, good thermal emitting and long lasting forest green dot indication for a lot of raw material processing works.
When 515nm green laser diode module applies a qualified glass coated lens, it also passes through a series of strict laser beam stability test and aging preventing test up to 24 hours. Once it is projecting high transmittance and high density forest green laser light at several miles far away, besides its formal use for those of inner room and close distance, this direct diode emission made 515nm green dot laser also makes highly precise forest green dot indication at great distance and high lighting working occasion as well. It is providing users quite satisfied dot measuring result for biomedical therapy, laser marking, laser engraving, drilling system, scientific experiment and spectrum analysis etc.
After the adoption of APC, ACC driving circuit board design, within wide range output power of 5mW to 50mW, this 515nm green laser diode module is performing well with constant output power and electric current supply. It gets no effect by increasing temperature. Once it gets proper use by skilled users, within quite long work distance and other high lighting working occasion, this 515nm green dot laser also makes quite satisfied dot alignment for labs, institutes and colleges etc. For the most important of all, whenever users are taking basic laser safety measures and wearing correct 515nm wavelength preventing laser safety glasses, it still brings users easy, free and long lasting dot indication for all working occasions effectively.
What is The Best Use of 150mW 515nm High Power Green Laser Diode Module?
In any type of high precision and high brightness dot indication at a quite long work distance, even though it is used under those of high lighting working occasion, it should be a quite nice job to operate a high power 515nm green laser diode module. On the basis of high power up to 150mW and special use of an external equipped thermal heat sink cooling system, the usual use of such laser device with durable anodized aluminum alloy housing tube has just achieved good thermal emitting and thermal stabilization. When it gets constant electric power source supply and proper equipment with other industrial machine or device, this high power 515nm green dot laser has just brought users quite easy reaching, long lasting and high precision forest green dot projection for a lot of machinery processing works.
The genuine use of a 515nm high power green laser diode module has to work for a quite long time, which should have to maintain its stable and reliable forest green dot projection for a lot of raw material processing works. When it gets advanced use of an import 515nm green laser diode as beam emitting source, together with external electric power source, it has just achieved the best designed thermal emitting and thermal stabilization. Whenever it makes long lasting and long distance dot projection within 10 hours per day, this high power 515nm green dot laser just achieves high level of laser light cycling use and highly reliable forest green dot projection as expected.
When 150mW 515nm green laser diode module applies a qualified glass coated lens, in a large variety of working environments, it adopts highly durable anodized aluminum alloy housing tube. It is bearing wide range operating temperature and any other harsh working occasion, such as mechanical moving or calibration etc. It is working well with clear and stable forest green dot projection under any other harsh working occasion of moisture or dust as well. Although it projects less brightness forest green laser light from laser beam aperture, besides its formal use of industrial precise dot measuring work, this high power 515nm green dot laser also makes good job for optical instrument, lab experiment, biomedical experiment, spectrum analysis etc.
Being made with electric wires extension for both of 150mW 515nm high power green laser diode module and DC power supply, with the assistance of a laser alignment mounting bracket, it allows easy carrying and quick reaching of forest green dot projection onto any raw material surface. On condition that it gets unique use of APC, ACC driving circuit board, after projection of quite powerful green laser radiation and thermal energy, this alignment laser still gets perfect protection of itself from increasing temperature and serious electric current impact. For the most important of all, only after high attention to laser safety measure and correct wearing of laser safety glasses, it just brings users high level of accuracy and security dot alignment effectively.
How to make stable alignment with 5mW to 50mW 515nm green laser diode module?
Once users are getting serious need of highly precise dot alignment at different work distances, unless the use of any prior dot positioning works, it would be a much more efficient job for users to operate a highly bright beam emitting tool of a 515nm green laser diode module. It applies the most advanced 515nm green laser diode as beam emitting source. In practical dot measuring work fields, owing to its long distance extending forest green laser light source emission, this 515nm green dot laser also makes sure of highly precise and clear forest green dot alignment at various work distances constantly.
The usual use of a 515nm green laser diode module has to work for multiple application fields, which should have to work with different dimension green dot diameter in continuous use. It is applying an import 515nm green laser diode and a metal heat sink, which is getting even better thermal emitting than formal air or water cooling system. In addition, according to the advanced use of a durable anodized aluminum alloy housing tube, available with 16mm and 26mm diameter metal housing tube, this direct diode emission made 515nm green dot laser always enables easy carrying and operation in continuous use.
Designed with the best quality glass coated lens, whatever kind of working surface it is pointing, this 515nm green laser diode module is performing well with high transmittance and high density forest green laser light source emission at long extending distances. In addition, not as bright as a 532nm green DPSS laser system, owing to its direct forest green laser light emission from an inner laser diode, this 515nm green laser module still enables the clearest and the most precise forest green dot projection within long extending distance of 25 meters. It is not simply used for industrial precise dot measuring work, but also providing users excellent dot alignment result for biomedical, laser marking, laser engraving, military targeting and scientific experiment work etc.
According to the easy connects with different operating voltage DC power supply, together with electric wires extension for both of 515nm green laser diode module and DC power source, it always allows the most convenient installation and the easiest reaching of green reference dot onto any raw material surface. The unique design of adjustable focus optic lens allows high concentration forest green laser light source emission, and high efficiency conversion of increasing accuracy and brightness green dot alignment in distance. It just brings users the best dot alignment solution for labs, institutes and colleges etc.
How to make precise use of a 532nm green laser diode module?
If you are looking for a highly precise and highly clear dot alignment solution, it might not be easy to reach with a simple laser pointer or prior dot positioning work at all. On considering of high work efficiency and highly clear dot alignment on different working surfaces, it is becoming a major trend for users to operate a high brightness green laser diode module. It always projects the most visible and the brightest green laser light from a middle wavelength of 532nm green DPSS laser system. On condition that it gets the lowest laser beam divergence and special TEM00 laser beam mode, either it is pointing at a close or long distance, the 532nm green dot laser has just assured the best quality green laser light source emission and the clearest green dot alignment at various work distances constantly.
The usual dot alignment work is processing onto different working surfaces and still has to work with highly clear and no decay light dot indication. As a result, the primary use of a metal heat sink cool system is configured with highly durable anodized aluminum alloy housing tube. When it gets high transmittance and high intensity green laser light emission from 532nm green DPSS laser system, after the generation of highly clear dot indication at different work distances, it is able to provide users excellent dot alignment solution for those of industrial and high Tech work fields effectively.
Configured with a qualified glass coed Lens and a glass window inside the durable aluminum alloy housing tube, this 532nm green laser diode module also passes through strict laser beam stability tests up to 24 hours. It is keeping work with high density green laser light emission and highly clear dot indication at various work distances. In practical precise dot measuring work fields, it enables easy and convenient use as an accessory part of other machine devices. Unless it is pointing under sunlight, it always provides users excellent dot indication for multiple fields, covering laser marking, laser engraving, laser medical therapy, and high Tech work etc.
Being made with wide range operating output the power of 5mW to 100mW, configured with APC, ACC driving circuit board design, this 532nm green laser diode module has just achieved the best quality green laser light source emission and the clearest dot indication in continuous use. No effect by overheating and over current impact in continuous use, as a result, once it makes long lasting dot indication, within work time of ten hours and leaving enough space and time for tube cooling down, this alignment laser has just achieved a high level of laser cycling use and highly reliable green dot indication for both long lasting and long distance use. Whenever it makes proper selection of correct output power and proper installation onto any other machine or device, under operation with high attention to laser safety issue and proper wearing of laser safety glasses, without any an exposure to beam aperture, it just assures easy, secured and long lasting dot generation in all application fields effectively.