What is an efficient job to make clear and precise dot indication? In order to assure its clear and precise enough dot indication for metal processing works, it is just the best solution to operate a high brightness device of a 515nm green laser diode module. Some of high reflective metals such as copper have a higher absorption rate of 515nm green laser beam than traditional near infrared laser, which can reduce energy waste and reduce the requirement for laser power. On the basis of correct use of output power and proper installation to correct device or equipment, this accessory part can easily achieve high precision and high efficiency process of various metals in real use.
The practical operation of a 515nm green laser diode module can easily establish a highly stable welding process, with more delicate welds, and has obvious advantages in welding copper wires and electronic components in battery assembly, electronic manufacturing and other fields. Usually according to real work distance and lighting occasion, the real use of a 515nm green dot laser enables correct output power within 5mW to 100mW, and high power range up to 150mW to 500mW. It is applying for multiple work distances and multiple lighting occasions in real dot measuring works.
What is the practical use of a 515nm green laser diode module?
3D printing: green dot laser can effectively solve the problem of pure copper and copper alloys in 3D printing, and metal materials with high thermal conductivity and high reflectivity can also achieve efficient processing.
cutting and engraving: the beam quality of 515nm green laser module is good and the precision is high, which can achieve micron level or even higher precision cutting and engraving, and can perform fine processing on metal materials so as to meet the processing needs of complex patterns and tiny structures. Compared with traditional cutting and engraving methods, the heat-affected zone of green dot laser is small, which can reduce thermal deformation and thermal damage of materials and improve processing quality.
Surface treatment: metal surfaces can be heat treated, alloyed, clad, etc. through utilizing the energy of 515nm green laser, to improve the hardness, wear resistance, corrosion resistance and other properties of the metal surface.
Realize micro-nano structure manufacturing: Manufacturing micro-nano structures on metal surfaces can be used to adjust the optical, electrical, wettability and other properties of metal surfaces to meet special functional requirements, such as manufacturing super-hydrophobic surfaces and surfaces that enhance light absorption.
Month: March 2025
Structure Advantages of 445nm Blue Line Laser Module
The usual use of a 445nm blue line laser module is making advanced use of an import laser diode and a qualified optic lens, configured with a high duration metal housing tube, it is able to be mounted properly onto other industrial machine or device. Connected with an external electric power source, it is making convenient and quick response blue reference line projection onto different working surfaces. On condition that ultra compact structure made laser device is operating properly by skilled users or professionals, this laser line generator is able to make ultra clear and fine enough line indication for multiple raw material processing works conveniently.
It is a major part for the design of a 445nm blue line laser module with a qualified glass coated lens within wide fan angles of 10 to 110 degree. It is able to work with ultra fine and straight blue reference line projection within 0.5 meter to 6 meters length in use. It can ensure good linearity in long distance line projection, providing a basis of high precision line positioning and measurement. It is a necessity to make basic measurement of desired line length, line fineness and work distance, thus laser line generator gets correct selection of output power and optic lens fan angle, and fulfills ultra fine and clear measurement as expected. In addition, according to proper adjustment of optic lens in front of laser beam aperture, this laser line generator enables freely adjusted laser line width and line emitting direction to achieve different line measuring requirement.
When 445nm blue line laser module gets high transmittance blue laser light source, it can effectively reduce the energy loss of the laser during transmission, and ensure that the output straight line laser has sufficient brightness and intensity. Equipped with APC, ACC driving circuit board and cooling system, it keeps stable output power and electric current supply, ensuring that the laser line generator can work stably under different working environmental conditions and working hours, and reducing the fluctuation of the laser output power. Usually it gets perfect safety protection circuit such as over voltage protection, over current protection, and overheating protection. It maintains ultra clear and stable blue line indication, with perfect protection of blue laser module from being damaged due to electrical failure, thereby improving the reliability and service life of the module.
Inside the durable anodized aluminum alloy housing tube, 445nm blue line laser module gets fully considers electromagnetic compatibility and can effectively suppress electromagnetic interference. At the same time, it also has strong anti-interference ability and can operate stably in a complex electromagnetic environment without interfering with other devices or being affected by the electromagnetic field of other devices. This ultra compact size tube made blue laser device enables quite easy installation and integration with various equipment or devices, without spending extra large space. It can be installed horizontally, vertically or tilted, and can be quickly and accurately docked and fixed with other equipment.
Key Features of Blue Line Laser Alignment
What is an efficient job for users to make ultra clear and fine enough line indication at a long work distance? In a lot of work fields, such as industry, construction, medical and other fields, owing to its super high brightness blue laser light source emission, it is always working well with ultra fine and straight blue reference line projection at long extending distance. Being made with qualified optic lens with different fan angles and constant electric power source supply, within quite long work distance and multiple lighting occasions etc, 445nm blue laser module is able to make high straightness, high stability and adjusted laser line generation onto various working surfaces.
The genuine use of a blue line laser alignment is getting featured advantages of ultra high line straightness. It applies a qualified glass coated lens or separate crystal lens within wide fan angles of 10 to 110 degree. Usually it emits qualified Gaussian beam or non Gaussian distribution blue laser beam, and forms into ultra high fineness and high linear quality blue reference line within 0.5 meter to 6 meters length in continuous use. When it gets ultra high line straightness of less than ≤0.1%, it can provide accurate positioning and marking, and fine line width, can achieve high precision measurement and detection.
In various complex environments, such as high and low temperature, humidity, strong vibration and other environments, this blue line laser alignment applies a durable anodized aluminum alloy housing tube, ensuring the output of clear and uniform straight line beams, long service life, and continuous use of more than 8000 hours. Together with a inner cooling system, it enables superior nice thermal emitting and thermal conductivity, which is able to provide users a ultra stable, uniform and fine blue reference line onto multiple raw material surfaces.
Cooperated with adjustable focus optic lens in front of laser beam aperture, only after easy screw of laser module head, this 445nm blue line laser alignment enables immediate blue laser light source concentration, and efficient conversion into increasing fineness and straightness blue line projection in distance. Blue laser line can be fine tuned in three dimensional space, which is convenient for users to adjust the position and angle of the laser line according to actual needs to achieve the best use effect. The line width of laser line generator can also be adjusted within a certain range.
Being made with ultra compact size and highly durable metal housing tube, this blue line laser alignment gets ultra small size, light weight, and easy installation and disassemble. It can be easily integrated into various equipment and systems, and most of them use universal installation interfaces and methods, which reduces the difficulty of installation. Owing to its beginning high power up to 50mW, it generates potential thermal energy hurt to eyes, thus users should take basic laser safety measure and avoid eye exposure so as to achieve easy and secured use for all measuring fields conveniently.
Stable Performed 405nm Violet Line Laser Alignment
Usually 405nm violet line alignment is made with a qualified semiconductor violet laser diode, which is getting a bit longer wavelength than invisible UV lasers. In order to assure its stable violet laser beam and violet line generation from beam aperture, it is always equipped with basic cooling system and qualified optic lens with different fan angles insides its high duration metal housing tube. When this violet laser module gets constant electric power source supply and proper installation, not limited by any working environments, it always realizes high energy violet laser light source output, and ultra stable and straight violet line indication at long extending distances constantly.
The advanced use of AC/DC adapter is providing continuous electric power source for the 405nm violet line laser alignment. it is applying an import 405nm violet laser diode within 50mW to 100mW and high power up to 150mW to 500mW as its beam emitting source, only after its correct equipment with 5V, 9V 1000mA DC power supply, it ensures normal work and realizes the control and adjustment of the laser output power. it generally has functions such as constant current control, over current protection and overheating protection etc.
Inside the durable anodized aluminum alloy housing tube, this violet laser module always applies a metal heat sink cooling system. It protects the internal optical and electronic components under wide range operating temperature and other harsh working environments etc. in addition, it always gets superior nice heat dissipation performance, which can dissipate the heat generated by the laser diode when it is working, and ensure the stable operation of the laser line generator.
According to different application fields and needs with different requirement of line length, line fineness and work distance, this 405nm violet line laser alignment allows correct selections of output power and optic lens fan angle. it generates highly straight and fine violet reference line from a qualified glass coated lens or separate crystal lens within wide fan angles of 10 to 110 degrees. When long distance projection of use in strong light environments is required, laser line generator should be choose with a high power; for some scenes with high precision requirements but no high brightness, low power laser modules can meet the need properly. Owing to its high level of laser beam stability in longtime use, the use of this laser line measuring tool ensures that the brightness and intensity of the line will not fluctuate significantly during the entire working process, which is conducive to ensuring the accuracy and consistency of detection, positioning and other work.