July 2019 – High Power Blue, Green, Red, Infrared Laser Modules

Intense Light Emitted High Power Red Laser Diode Module

In a lot of precise device manufacturing works, there is always quite serious need of clear and accurate dot alignment result at quite long work distance, it would be quite efficient solution for users to adopt a high power red laser diode module. It is projecting the most intense red laser light from high power 650nm red laser diode up to 150mW to 500mW, equipped with external thermal emitting and electric power source, this high power red dot laser is always workable with superior nice thermal emitting and highly stable red referenced dot projection in continuous work.

Employed by import 650nm red laser diode as its beam emitting source, owing to its quite long developing history and quite mature laser diode tech application, after production into a high power 650nm red laser diode module, it is always getting even more stable performance than formal laser device, but also getting the lowest production cost. According to quite easy connect with DC input power supply, after easy accepting of wide range electric current within 100V to 240V, this high power red dot laser is always applied easily in majority of country and regions, and then making sure of highly clear and stable dot generation in use.
When it is generating the most powerful and intense red laser light directly from high power 650nm red laser diode module, it is also generating extremely powerful thermal energy, causing possibility of laser diode and electric driving circuit board burning out without no beam stability issue. However, laser tech engineer has just designed this red dot laser with APC, ACC driving circuit board, which is preventing serious electric current impacting and increasing temperature. Under proper red laser dot alignment work within 8 to 10 hours per day, after quite enough time leaving for laser tube cooling down, it is just obtaining excellent laser light cycling use and long serving lifetime in continuous work.
Whatever kind of output power it is selected, high power 650nm red laser diode module is generating the most intense red light and the clearest red reference dot at quite long distance as well. It is never a joking work to operate such industrial stabilized alignment laser, which should only be used with high attention to hurt to eyes or retina. In process of continuous red dot projection work, it is the key issue to wear professional 650nm wavelength preventing laser safety goggles and avoid eye exposure until achieving safe and free measurement perfectly.

Constant Projecting High Power Green Cross Line Laser Module

Without any simple use of triangular meter, blocking board or formal mechanical cross line aligning device, in order to get accurate and easy cross line alignment on any raw material surface, it would be quite efficient solution to adopt high power green cross line laser module. It is projecting the most powerful and intense green laser light from 532nm green DPSS laser system. When it is generating the purest red laser light with the most sensitive color light and quite low laser beam divergence, after special design of separate metal heat sink cooling system, this high power green cross laser would just make sure of highly accurate and immediate cross line generation under long distance and high lighting occasion efficiently.

Designed with separate metal heat sink cooling system and external DC input power supply, high power 532nm green cross line laser module is leaving for the largest space for thermal emitting. It is being used as an accessory part, when it is installed on any other device, it will working together with any other machine or device. However, under constant increasing temperature of laser tube, it will increase possibility of laser diode and electric driving circuit burning out or damage. This high power cross laser alignment tool enables correct operation within 8 to 10 hours per day, under enough time and space reserving for tube cooling down, it will maintain highly stable and reliable green cross line projection in continuous work.
In multiple industrial precise device manufacturing work fields, such as laser alignment for screen printing system, military targeting, laser medical therapy and other scientific research works, high power green cross line laser module is just used as an accessory part. It is equipped with the best quality glass coated lens with selectable lens degree of 10, 15 and 110 degree. When it is generating different dimension cross line source, it is only necessary for users to learn enough of cross line length, thickness and work distance, this cross laser alignment would be selected with correct output power and optic lens degree until achieving quite satisfied measuring result effectively.
Under operation as an accessory part, with the assistance of laser alignment mounting bracket, high power green cross line laser module is easily installed on industrial machine or device. Green cross line source is easily reaching any long distance and high lighting working occasions, also keeping steady processing of raw material surface efficiently. Under condition that users are paying attention thermal energy hurt to human eyes, after proper wearing of 532nm wavelength preventing laser safety glasses and adjustment of cross line targeting direction, this high power green cross laser achieves easy and clear measurement perfectly.

Increasing Stability High Power 200mW Green Laser Diode Module

Usually it is spending quite a long time to make dot alignment on multiple working surfaces, however, it is not helpful at all to only stop on the step of formal laser device or any other mechanical dot aligning tool etc. When the genuine dot alignment is processed with quite high power 200mW green laser diode module, being made with separate metal heat sink cooling system and constant power source from DC input power supply, it is just making quite easy and immediate green reference dot projection in distance immediately. Every time green dot laser is installed and adjusted correctly, it is making quite easy and convenient dot generation for any long distance and high lighting working occasions effectively.

Comparing with formal low power laser device, high power 200mW green laser diode module is projecting extremely powerful and intense green laser light from beam aperture, and producing highly clear green dot at quite long distance as well. In process of highly stable dot alignment on multiple raw material surfaces, high power green dot laser is equipped with aircraft used aluminum alloy housing tube, which is ensuring superior nice thermal conductivity and highly stable dot alignment under multiple mechanical shocking, calibration or moving etc.
When high power 200mW green laser diode module is used for continuous dot projection work, after quite easy connect with DC input power supply, it makes sure of constant green reference dot projection. It is accepting wide range electric current within 100V to 240V, after converting into quite lower operating voltage of 9V DC power, this green dot laser is keeping the most reliable dot alignment, also including quite special work fields, such as high temperature and strong corrosion. This dot laser alignment is a quite sensitive color laser light emitted laser device, once the real operating temperature is much lower than room, it is only necessary to make simple preheating of laser module tube, it will recover high brightness and highly clear green reference dot projection in long term use.
Under condition that high power 200mW green laser diode module is applied for majority working environments, it should have to maintain excellent laser light cycling use and highly stable dot generation in use. The best design of APC, ACC driving circuit board prevents serious electric current impacting and increasing temperature of laser tube. When this alignment laser is properly used within 8 to 10 hours per day, after enough time and space reserving for laser tube cooling down, it is getting the most stable dot aligning performance and long serving lifetime in use. After correct wearing of 532nm wavelength preventing laser safety glasses and easy adjustment of laser dot targeting direction, it achieves easy and clear dot measurement perfectly.

Precisely Measured High Power 650nm Red Laser Diode Module

It is always a quite long work distance for users to get precise enough dot alignment under special application fields, it is not helpful at all for users to only keep in mind of formal power laser device and any other manual dot measuring device. When dot alignment work is proceed with a high power 650nm red laser diode module, equipped with external DC input power supply and separate metal heat sink cooling system, it is just becoming a real and genuine used dot laser alignment tool for all kind of precise device manufacturing works effectively.

Comparing with formal output power made laser device, high power 650nm red laser diode module is always employing high power 650nm red laser diode up to 150mW to 500mW. It is not only generating quite powerful and intense red laser light from laser beam aperture, it is also make highly clear red reference dot projection at quite long work distance. It is a moderate brightness laser dot alignment tool, under condition it is not used under sunlight, it is also generating highly clear red reference dot under formal lighting occasion as expected.
Whatever kind of working surface it is pointed, under operation of qualified glass coated lens and import 650nm red laser diode, high power red laser diode module is keeping work with quite strong laser beam transmittance. High intensity red laser light is converted into the most compact size red reference dot, and then making easy and highly clear red dot alignment on multiple working surfaces. Within quite wide range output power, it should only be equipped with 9V DC input power supply, this red dot laser is keeping highly clear and continuous red dot projection, also getting perfect performance under high temperature and strong corrosion etc.
In multiple industrial precise device manufacturing works, including military targeting, stone, food, wood and textile processing works, high power 650nm red laser diode module is just used as an accessory part. Under specially designed electric wires extension for both red alignment laser and DC input power supply, within freely installed distance of 0.3 meter to 3 meters, it is ensuring convenient installation and adjustment, providing the most accurate dot generation on any vertical or horizontal surfaces. In any occasion of highly clear dot alignment work, quite powerful red laser light and thermal energy emission might cause serious hurt to human eyes. Only if users are taking basic laser safety measure and wearing professional laser safety goggles, this industrial stabilized red dot laser assures easy and clear measurement perfectly.